Xerox 8400 Ink Sticks - Save Money with Compatible!

Affordable color lasers have multiplied from discounted old stock through new, slightly more compact, models a year later to today. When every small office and workgroup can enjoy a workhorse, high-volume alternative to inkjet printing and every vendor offers a color laser priced low enough to tempt even solo, let alone network, users.

Xerox Phaser 8400 doesn't utilize laser technology. It utilizes ink to make stunning color copies very rapidly. It is also compatible with PostScript, and you can adjust color settings in a way that's not possible with a low level laser printer. Of course, you have to give up something. It won't run tons of black & white copies like a laser printer, and it's no competition for an inkjet when it comes to the quality of its images, but it's still pretty terrific.

The Phaser 8400 is a solid ink printer (also known as wax-jet or phase-change printer). Instead of using liquid or powdered inks, the Phaser 8400 utilizes small solid blocks of yellow, cyan, magenta, and black ink that are specially shaped to be held and used by the printer. Because the blocks are solid, the Phaser 8400 is easy to reload with no mess or fuss.

The fact that Phaser's software driver and front-panel LCD don't have a gauge to show the ink remaining can be uncomfortable to people used to regular ink and toner cartridge. The LCD does have a low-ink warning light. However, you can see the ink level by simply lifting the front hood of the printer, and can add more ink at any time without the uncertainties that come with newly installed cartridges.

As opposed to the standard procedure of discarding or recycling cartridges and ink storage units, our machine results in considerably less waste. All that is needed for continued operation are three small pieces. These consist of a "maintenance kit", a "lubricating kit", and a tray to capture any waste material. Monitor these and replace as necessary, and you will have no problems.

Solid ink printers utilize heat and pressure to make an image on paper. The printer melts a small portion of the desired color(s) and sprays the ink onto a heated, rotating drum which transfers the image to paper. The Xerox Phaser 8400 printer has distinct environmental advantages over most low priced printers. Using only 1500 watts of power, the Phaser 8400 uses a fifth less electricity than liquid ink printers and the 600 X 600 dpi (1236 individual nozzles) print head transfers the image in a single pass (four is standard).

The ink dries off immediately on the page, and unlike inkjet there is no seeping and this won't blot on the paper, also it would not smear when swiped with a damp finger, however this can be removed if scratched with a fingernail. Hence the printout when dry would appear damp. The printout would practically look like having been painted on with rich, glossy shades and the negatives like banding that inkjets and to an extend laser printers have are eliminated here.

Article Source: http://bestinfobay.com

Phaser 8400 ink color laser printer doesn't utilize laser technology. It utilizes ink to make stunning color copies very rapidly. It won't run tons of black & white copies like a laser printer, and it's no competition for an inkjet when it comes to the quality of its images, but it's still pretty terrific. The Phaser 8400 solid ink printer utilizes small solid blocks of yellow, cyan, magenta, and black ink that are specially shaped to be held and used by the printer. The Xerox Phaser 8400 is revolutionary. By simply opening the front of the printer, you can see how much ink has been used.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated